My 100% Tig welding pipe welding project for a high pressure system for work, and Tig welding flange to pipe. Every joint is ex-rayed after completion before I move to the next section. I've not failed ex-ray for any of my weld joints because I take pride in every single weld I perform. I get complements almost every day by independent CWIs that come in and inspect or welds because they say my welds look like they were done by a machine. I love what I do and I'm a true Perfectionist at my trade.
My 100% penetration butt joint weld with 1/8 inch gap with purging gas. Walking the cup technique Tig process.
My 3/8" pipe to flange fillet weld. Tig process for a tight weave look.
My 100% joint weld with a 1/8" gap with back up purge gas. Tig process.
My Tig welding cap pass.
My Tig root pass on pipe to flange using the walk the cup technique fish scale pattern.
My walking the cup soft look Tig process to achieve the millipede soft pattern.
Me using the Tig process. Walking the cup to stack welds to produce a 1/2" weld . It has to be a 1/2" from throat to face of weld and also throat to toe has to be 1/2".
Me making my root weld using the walking the cup Tig technique tight weave pattern.
