This project was a simple front bumper cover repair job on a 2013 Subaru Legacy. Along with the very visible gouges into the plastic, the OEM paint cracked all along the bottom and up next to the fog light insert. After feathering the damaged paint, a very light skim of flexible bumper poly filler ensured there would be no "drop off" from the old paint to the new. The color is 37J - Satin White Pearl. After priming and applying white sealer, the base white was applied and allowed to flash. The midcoat pearl was applied and blended along the bottom of the bumper, and then two coats of PPG DCU2021 clear were applied.