WorkHands WorkHands
  1. Home
    2. |
  2. People
    3. |
  3. anthony white

anthony white


Tools & Equipment


Work Experience

  • R.N. Pyle Mechanical Contractors

    1980-2000 | Metal Fabricator And Welder

    • Read blue prints, take off material, layout, cut and form, fit, tack weld and weld. • Worked with carbon steel, aluminum, stainless steel, galvanize, copper and bronze, material ranging from 24 ga. – 2” thick, operated 150 ton x 10’ shear, 180 ton x 12’ press brake, 1’ mechanical roll, 6’ mechanical roll and 40 ton punch, notcher and shear and hydraulic angle iron roller. • Used variety of electrical and air power tools, horizontal and vertical saws. • Welding performed with tig on aluminum and stainless steel with metal thickness ranging from 22ga.-1/4” thick. Aluminum welding with mig on material ranging from .080 -1” thick. Mig welding with hardwire on carbon steel and stainless steel. Mig flux core welding on carbon steel and stainless steel. Stick welding experience with 6011, 7018, 308 s/s, 309 s/s and 316 s/s rods. Ex-ray welding experience on code vessels. • Torch and track torch experience, beveling and gouging. • Forklift and rigging capabilities with steel chokers and nylon straps. • Field experience working in power plants and paper mills. • Demolition and installing new work. • Layout experience in ductwork, steel beams, stringers, handrails, chimney caps, flashing, taking jobs from blueprints to completed scope of work.

  • W.D. Rogers Mechanical Contractors

    2000-2003 | Metal Fabricator And Welder

    • Read blue prints, take off material, layout, cut and form, fit, tack weld and weld. • Worked with carbon steel, aluminum, stainless steel, brass, copper and galvanized material ranging from 26 ga. - 2” thick. • Operated 50 ton x10’ hydraulic shear, 10’ mechanical brae 6’ mechanical roll, chop saw, horizontal saw, and a variety of air and electrical hand held tools. • Welding performed with tig on stainless steel and aluminum ranging from 22 ga. -1/4” thick material. Aluminum mig welding on material from .080 – 1” thick. Mig welding with hard wire on carbon steel and stainless steel. Flux core welding on carbon steel and stainless steel. Stick welding experience also. • Torch and track torch experience. • Beveling and gouging experience. • Forklift and rigging capabilities. • Wide range of forming and fabricating materials provided to commercial applications, paper mills and power plants.

  • Highgrade Fabrication

    2003-2008 | Metal Fabricator And Welder

    • Read blue prints, take off material, layout, cut and form, fit, tack weld and weld. • Worked with carbon steel, aluminum, stainless steel, bronze, copper and galvanized material ranging from 26 ga. - 2” thick. • Operated 150 ton x 10’ hydraulic shear, 180 ton x 12’ hydraulic press brake, 10’ mechanical roll, 6’ mechanical roll, 40 ton notcher, punch and shear, horizontal and vertical saws, torch and track torch. Used a variety of electrical and air powered hand held drills, grinders and saws. • Welding performed on aluminum and stainless steel with tig on material ranging from 22 ga. -1/4” thick material. Aluminum mig welding on material from .080 – 1” thick. Mig hard wire on carbon steel and stainless steel. Mig flux core on carbon steel and stainless steel, stick weld experience. • Forklift experience with 9000 lb. capabilities. • Rigging experience with steel chokes and nylon straps on heavy loads and material. • Experience with plate dogs and overhead cranes. • Wide range of forming all types of materials including flashing, ductwork, steel platforms and handrails, concrete forms, etc.

  • Patti Marine Enterprises

    Shipfitter and Welder

    • Read blue prints, take off material, layout, cut and form, fit, tack weld and weld. • Welding performed on carbon steel with flux core wire, aluminum welding with mig wire, tig welding on aluminum and stainless steel. • Layout cut and bend carbon steel and stainless steel pipe with hydraulic bender for hydraulic lines and handrails, stick weld carbon steel and stainless steel hydraulic lines. • Operated hydraulic punch, notcher, and shear. Operated hydraulic roll for forming angle, flat bar, and pipe. • Operated drill motor, grinder, and a variety of air tools. • Fitted and welded sch. 40 and sch. 80 pipe with 150 lb. flanges. Laid out stringers and handrails, fitted and welded out aluminum and carbon steel

Education


Contacts